PVC Banners

LAMINATED BANNER 500 g/m2

A laminated banner is a one-sided, low-cost PVC-based material recommended for short-term exposure. It is dedicated to outdoor use, and its durability, depending on weather conditions, is estimated at about 6 months.
Material colour white matt
Material type PVC
Weight 500 g/m2
Printing technology UV, Latex, Eco-solwent
Maximum width 500 cm
Maximum roll length 50 lm
Mechanical durability medium
Rainproof yes
Flame retardancy no

LAMINATED BANNNER REINFORCED 440 g/m2

Reinforced laminated PVC banner is a one-sided, low-cost material which, due to its denser weave, has a higher tear resistance. It is dedicated to outdoor use, and its durability, depending on weather conditions, is estimated at about 6 months.
Material colour white matt
Material type PVC
Weight 440 g/m2
Printing technology UV, Latex, Eco-solwent
Maximum width 500 cm
Maximum roll length 50 lm
Mechanical durability medium
Rainproof yes
Flame retardancy no

COATED BANNER PREMIUM 510 g/m2

This quality PVC-coated banner is a material that has the highest tear resistance and low elongation. It is dedicated to outdoor use, and its durability, depending on weather conditions, is estimated at about 12 months.
Material colour white matt
Material type PVC
Weight 510 g/m2
Printing technology UV, Latex, Eco-solwent
Maximum width 500 cm
Maximum roll length 50 lm
Mechanical durability high
Rainproof yes
Flame retardancy yes

MESH BANNER 280 g/m2

PVC banner mesh is a perforated material dedicated to the production of outdoor graphics. Thanks to the airy structure, it has increased resistance to gusts of wind. It is dedicated for outdoor use and has a B1 flame retardant certificate.
Material colour white matt
Material type perforated PVC
Weight 280 g/m2
Printing technology UV, Latex, Eco-solwent
Maximum width 500 cm
Maximum roll length 100 lm
Mechanical durability high
Rainproof yes
Flame retardancy yes

BLOCKOUT BANNER 440-650 g/m2

PVC blockout banner is a material dedicated to double-sided printing. It has a special inner layer that blocks see-through. It is a material with high tear strength. It is resistant to weather conditions.
Material colour white matt
Material type blockout PVC
Weight 440-650 g/m2
Printing technology UV, Latex, Eco-solwent
Maximum width 500 cm
Maximum roll length 50 lm
Mechanical durability high
Rainproof yes
Flame retardancy yes

BACKLIGHT BANNER 500 g/m2

Backlight PVC banner is a translucent material dedicated to the production of large-format backlit graphics. The backlight banner allows for deeply saturated and eye-catching graphics.
Material colour white translucent
Material type backlight PVC
Weight 500 g/m2
Printing technology UV, Latex, Eco-solwent
Maximum width 500 cm
Maximum roll length 50 lm
Mechanical durability high
Rainproof yes
Flame retardancy yes

REFLECTIVE BANNER 500 g/m2

The PVC reflective banner has a prismatic top coating that reflects the light. Its reflective properties make the printed message more noticeable, especially in night-light conditions.
Material colour white reflective
Material type laminated PVC
Weight 500 g/m2
Printing technology UV, Latex, Eco-solwent
Maximum width 500 cm
Maximum roll length 50 lm
Mechanical durability high
Rainproof yes
Flame retardancy no

Fabrics

FLAG 115 g/m2

115g/m2 polyester fabric is the most popular material for the production of flags and thin textile banners. The flag is partially transparent and the print is 80% visible on the other side of the material in mirror.
Material colour white matt
Material type polyester fabric
Weight 115 g/m2
Printing technology Sublimation
Maximum width 320 cm
Maximum roll length 100 lm
Mechanical durability medium
Rainproof yes
Flame retardancy yes

MESH FLAG 115 g/m2

This 115g/m2 polyester flag fabric is distinguished by a perforated, perforated structure that allows the passage of gusts of wind. The fabric has a strong weave and low weight. This is a universal textile banner.
Material colour white matt
Material type polyester mesh fabric
Weight 115 g/m2
Printing technology Sublimation
Maximum width 320 cm
Maximum roll length 100 lm
Mechanical durability medium
Rainproof yes
Flame retardancy yes

DECOR BANNER 210 g/m2

The most popular polyester material dedicated to the production of PVC-free material banners of the highest quality. Decor 210g/m2 has a matt surface and a flame retardant certificate. Dedicated to the production of stage graphics, backdrop, banners for concerts and scenography, large-format backwall.
Material colour white matt
Material type polyester fabric
Weight 210 g/m2
Printing technology Sublimation
Maximum width 320 cm
Maximum roll length 100 lm
Mechanical durability high
Rainproof yes
Flame retardancy yes

STRETCH BANNER 240 g/m2

Matte 240g polyester banner distinguished by its flexible weave. It is dimensionally stable and easy to unfasten on structures. It has the ability to gently stretch the graphics in one direction to tension the presentation system. Flammability class B1.
Material colour white matt
Material type polyester fabric
Weight 240 g/m2
Printing technology Sublimation
Maximum width 320 cm
Maximum roll length 50 lm
Mechanical durability medium
Rainproof no
Flame retardancy yes

SAMBA BACKLIGHT 195 g/m2

High-quality polyester translucent fabric dedicated to the production of backlit graphics with sewn flat keder and used mainly for aluframe lightboxes. The fabric is waterproof and has a flame retardant certificate.
Material colour white translucent
Material type coated polyester
Weight 195 g/m2
Printing technology LAtex, UV, Sublimation
Maximum width 320 cm
Maximum roll length 50 lm
Mechanical durability high
Rainproof yes
Flame retardancy yes

SUPER TENT 260 g/m2

A strong polyester fabric recommended for the production of outdoor graphics for events, especially for deckchairs, tents and covers. The material has been treated with a polyurethane bath, making it highly waterproof.
Material colour white matt
Material type coated polyester
Weight 115 g/m2
Printing technology Sublimation
Maximum width 160 cm
Maximum roll length 50 lm
Mechanical durability high
Rainproof yes
Flame retardancy yes

BLIND BLOCKOUT 280 g/m2

280g polyester fabric with PU coating. Smooth, even, dimensionally stable surface allows the material to be used for the production of blackout blinds and stage decorations. Thanks to the double-sided coating, the material can be printed on both sides.
Material colour white matt
Material type coated polyester
Weight 280 g/m2
Printing technology Latex, UV
Maximum width 320 cm
Maximum roll length 50 lm
Mechanical durability high
Rainproof no
Flame retardancy no

POLY CANVAS 240 g/m2

Polyester canvas in an economical version. Dedicated to printing reproductions, paintings and graphics intended for further binding on a wooden loom.
Material colour white matt
Material type coated polyester
Weight 240 g/m2
Printing technology Latex, UV
Maximum width 152 cm
Maximum roll length 30 lm
Mechanical durability high
Rainproof no
Flame retardancy no

CANVAS PREMIUM 360 g/m2

Premium coated cotton canvas. It allows you to obtain deeply saturated colours. Dedicated to printing reproductions, paintings and graphics intended for further binding on a wooden loom.
Material colour white matt
Material type cotton fabric
Weight 360 g/m2
Printing technology Latex, UV
Maximum width 152 cm
Maximum roll length 50 lm
Mechanical durability high
Rainproof no
Flame retardancy no

Self-adhesive vinyls

MONOMERIC SELF-ADHESIVE VINYL

The most popular large-format self-adhesive vinyl dedicated to sticking, to flat surfaces. Durability estimated at 1-3 years depends on the place of exposure (sunshine) and the choice of optional laminate.
Material colour white gloss / matt
Material type PVC
Thickness 100 mic
Printing technology Latex, UV, Eco-solvent
Maximum width 160 cm
Maximum roll length 50 lm
Durability 1-3 years
Rainproof yes
Flame retardancy no

POLYMERIC SELF-ADHESIVE VINYL

Medium-term self-adhesive vinyl dedicated to flat and slightly wavy surfaces. It is distinguished by a durability estimated at 3-5 years and depends on the place of exposure (sunshine) and the choice of optional laminate.
Material colour white gloss / matt
Material type PVC
Thickness 100 mic
Printing technology Latex, UV, Eco-solvent
Maximum width 160 cm
Maximum roll length 50 lm
Durability 3-5 years
Rainproof yes
Flame retardancy yes

CAST SELF-ADHESIVE VINYL

Long-term self-adhesive vinyl dedicated to sticking 3D surfaces with deep embossing. e.g. car wrapping. The cast film has a long shelf life estimated at 5-7 years. The used tubular glue guarantees effective gluing without air bubbles.
Material colour white gloss / matt
Material type PVC
Thickness 90 mic
Printing technology Latex, UV, Eco-solvent
Maximum width 160 cm
Maximum roll length 50 lm
Durability 5-7 years
Rainproof yes
Flame retardancy yes

ONE WAY VISION VINYL

The One Way Vision vinyl consists of hundreds of small holes that allow light to pass through. The graphics are perfectly visible on the outside, and at the same time subtly cover the inside of the room. The OWV foil enables complete gluing of the glass, and thanks to the perforated structure, it partially transmits light. From the adhesive side, the foil has a black tint.
Material colour white gloss
Material type perforated PVC
Thickness 100 mic
Printing technology Latex, UV, Eco-solvent
Maximum width 160 cm
Maximum roll length 50 lm
Durability approx. 1 year
Rainproof yes
Flame retardancy yes

EASY DOT VINYL

The Easy Dot vinyl has a special droplet-shaped adhesive that allows easy application without errors. The revolutionary formula of the adhesive allows for quick application without the involvement of specialists. The film also allows repositioning.
Material colour white gloss / matt
Material type PVC
Thickness 100 mic
Printing technology Latex, UV, Eco-solvent
Maximum width 160 cm
Maximum roll length 50 lm
Durability approx. 1 year
Rainproof partially
Flame retardancy yes

PVC-FREE SELF-ADHESIVE FILM

Self-adhesive PVC-Free filmn is a white, shiny and modern substrate with a sustainable impact on the environment. The material is recyclable and 100% PVC free.
Material colour white gloss
Material type PP
Thickness 100 mic
Printing technology Latex, UV, Eco-solvent
Maximum width 160 cm
Maximum roll length 50 lm
Durability 1-2 years
Rainproof yes
Flame retardancy no

Poster & Wallpaper

BLUEBACK BBS 120 g/m2

A cheap, matte economy paper with a blue back. The paper has a lower level of whiteness than standard substrates. It is a low-cost solution for short-term applications.
Material colour white matt
Material type paper
Weight 120 g/m2
Printing technology UV, Latex, Eco-solwent
Maximum width 152 cm
Maximum roll length 150 lm
Mechanical durability low
Rainproof yes
Flame retardancy no

SILK POSTER PAPER 200g/m2

It is a standard poster paper with a high whiteness level. It allows you to maintain a balance between high print quality and an affordable price. The paper has a matte finish.
Material colour white matt
Material type paper
Weight 200 g/m2
Printing technology UV, Latex
Maximum width 160 cm
Maximum roll length 75 lm
Mechanical durability low
Rainproof no
Flame retardancy no

POSTER PRO PAPER 200g/m2

Rigid paper with a deeply matte surface. It allows you to achieve sensational printing results. It is dedicated to artistic prints.
Material colour white matt
Material type paper
Weight 200 g/m2
Printing technology UV, Latex, Eco-solvent
Maximum width 152 cm
Maximum roll length 75 lm
Mechanical durability low
Rainproof no
Flame retardancy no

SATIN POSTER PAPER 200g/m2

High-quality paper for decorative applications with a semi-gloss structure. Eagerly chosen for photo exhibitions.
Material colour white satin
Material type paper
Weight 200 g/m2
Printing technology UV, Eco-solvent
Maximum width 152 cm
Maximum roll length 50 lm
Mechanical durability low
Rainproof no
Flame retardancy no

LATEX WALLPAPER 212g/m2

Smooth wallpaper 212 g/m2 with reinforcement in the form of latex fibres. It is dedicated to the production of individual photo wallpapers. Installation is carried out using standard application tools.
Material colour white matt
Material type latex paper
Weight 212 g/m2
Printing technology Latex
Maximum width 137 cm
Maximum roll length 50 lm
Mechanical durability low
Moisture resistance medium
Health atest no

FIZELIN WALLPAPER

Smooth cellulose-non-woven wallpaper 190 g/m2 dedicated to the production of individual photo wallpapers. Its assembly is carried out using standard application tools. The glue only needs to be spread on the wall. The wallpaper dries quickly and is reinforced against tearing and scratching.
Material colour white matt
Material type fizelin
Weight 190 g/m2
Printing technology Latex
Maximum width 137 cm
Maximum roll length 50 lm
Mechanical durability medium
Moisture resistance medium
Health atest yes

WASHABLE WALLPAPER

Thick vinyl wallpaper with a PVC coating on a non-woven backing with a weight of 350g/m2. It is intended for gluing on walls using standard application tools. The washable wallpaper allows for photorealistic print quality and is quick-drying and scratch-resistant.
Material colour white matt
Material type pvc coated fizelin
Weight 350 g/m2
Printing technology Latex
Maximum width 137 cm
Maximum roll length 50 lm
Mechanical durability high
Moisture resistance yes
Health atest yes

SELF-ADHESIVE WALLPAPER

Matt white foil dedicated to the production of wallpapers. Gray adhesive with high initial tack allows proper application on many difficult surfaces, including most types of flat walls, as well as interior and exterior walls painted with paints containing latex, requiring the use of special adhesives.
Material colour white matt
Material type pvc vinyl
Thickness 100 mic
Printing technology Latex
Maximum width 137 cm
Maximum roll length 50 lm
Mechanical durability high
Moisture resistance yes
Health atest yes

SELF-ADHESIVE FABRIC WALLPAPER

Self-adhesive fabric easy to stick. The adhesive formula allows sticking and unsticking and does not leave any glue on the substrate. Intended for application on walls, furniture, doors as wallpaper, which does not damage the surface after removal. A perfect element of decoration in children's rooms, kindergartens.
Material colour white matt
Material type pes coated pvc
Thickness 100 mic
Printing technology Latex
Maximum width 137 cm
Maximum roll length 50 lm
Mechanical durability high
Moisture resistance yes
Health atest no

Roll labels

PP WHITE GLOSS FILM

Standard PP film has a permanent acrylic adhesive with high initial tack and good performance at low temperatures on a variety of substrates. Intended for application on plastic packaging, glass, metal, varnished surfaces as well as cardboard and paper. Works for most common applications.
Material colour white gloss
Material type PP film
Weight / thickness 50 g/m2 / 58 mic
Adhesive type standard
Min. application temperature +5°C
Temperature of use od -20° C do +80° C
Mechanical durability high
Moisture resistance yes
Food contact non-direct

PP WHITE GLOSS FILM EXTRA

PP Extra film can be stuck on rigid surfaces made of HDPE plastics and on large-area packaging. High tack acrylic emulsion adhesive provides labels with excellent adhesion and wet adhesion. Labels can also safely come into direct contact with dry, moist and fatty foods.
Material colour white gloss
Material type PP film
Weight / thickness 59 g/m2 / 57 mic
Adhesive type strong
Min. application temperature +0°C
Temperature of use od -20° C do +80° C
Mechanical durability high
Moisture resistance yes
Food contact non-direct

PP CLEAR GLOSS FILM

The transparent PP film has a highly transparent acrylic permanent adhesive with strong adhesion to apolar substrates (e.g. PE and PP). The adhesive used in the clear labels is ISEGA approved and has been approved for direct contact with dry and moist non-fat foodstuffs.
Material colour transparent gloss
Material type PP film
Weight / thickness 54 g/m2 / 60 mic
Adhesive type standard
Min. application temperature -5°C
Temperature of use od -40° C do +120° C
Mechanical durability high
Moisture resistance yes
Food contact non-direct

PP SILVER CHROME FILM

Silver chrome PP film has a permanent acrylic emulsion adhesive. This clear, general-purpose adhesive is designed for smooth to slightly uneven surfaces. It is weather resistant with good adhesion even on apolar substrates.
Material colour silver chrome
Material type PP film
Weight / thickness 47 g/m2 / 51 mic
Adhesive type standard
Min. application temperature +5°C
Temperature of use od -20° C do +80° C
Mechanical durability high
Moisture resistance yes
Food contact non-direct

PAPER SEMIGLOSS

White, one-sided coated wood-free self-adhesive paper with a semi-gloss surface. It is FSC® certified. The adhesive has high initial tack and good performance at low temperatures on a wide range of substrates.
Material colour white semigloss
Material type coated paper
Weight / thickness 77 g/m2 / 66 mic
Adhesive type standard
Min. application temperature +5°C
Temperature of use od -20° C do +80° C
Mechanical durability low
Moisture resistance no
Food contact non-direct

PAPER SEMIGLOSS EXTRA

White, one-sided coated wood-free self-adhesive paper with a semi-gloss surface. It is FSC® certified. It is designed for refrigeration applications. The adhesive has high initial tack, excellent adhesion and excellent low temperature performance on a wide range of substrates.
Material colour white semigloss
Material type coated paper
Weight / thickness 77 g/m2 / 66 mic
Adhesive type strong
Min. application temperature -10°C
Temperature of use od -30° C do +80° C
Mechanical durability low
Moisture resistance no
Food contact non-direct

PAPER FROZEN ORION

Glossy, pearl coated paper. The super strong rubber adhesive has excellent adhesion to a wide range of substrates, including apolar and slightly rough substrates. The paper has wet strength and fungicidal treatments.
Material colour white pearl
Material type premium paper textured
Weight / thickness 90 g/m2 / 105 mic
Adhesive type super strong
Min. application temperature +5°C
Temperature of use od -30° C do +70° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

PAPER MARTELE BLANC

Woodfree matte paper with a ``hammered`` embossed texture. The super strong adhesive has excellent adhesion to a wide range of substrates, including apolar and slightly rough substrates. Wet strength and fungicidal treatments. The face material is made of FSC®-certified paper.
Material colour white matt
Material type premium paper textured
Weight / thickness 90 g/m2 / 118 mic
Adhesive type super strong
Min. application temperature +5°C
Temperature of use od -30° C do +70° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

PAPER PAMPA WHITE

White, uncoated, matte, woodfree paper with a fine embossed diamond structure. The super strong adhesive has excellent adhesion to a wide range of substrates. Wet strength and fungicidal treatments. It is FSC® certified.
Material colour white pearl
Material type premium paper textured
Weight / thickness 90 g/m2 / 130 mic
Adhesive type super strong
Min. application temperature +5°C
Temperature of use od -30° C do +70° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

PAPER SKIN BLANC

White, uncoated, matte, wood-free self-adhesive paper with a slightly wrinkled structure. The super strong adhesive has excellent adhesion to a wide range of substrates. Wet strength and fungicidal treatments. It is FSC® certified.
Material colour white matt
Material type premium paper textured
Weight / thickness 90 g/m2 / 122 mic
Adhesive type super strong
Min. application temperature +5°C
Temperature of use od -30° C do +70° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

PAPER VERGE CREME

Cream, uncoated, matte woodfree paper. It has a delicate, ribbed structure. The strong adhesive has high initial tack and good low temperature performance on a wide range of substrates. Wet strength and fungicidal treatments. It is FSC® certified.
Material colour creme uncoated
Material type premium paper textured
Weight / thickness 89 g/m2 / 122 mic
Adhesive type strong
Min. application temperature +5°C
Temperature of use od -20° C do +80° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

PAPER KRAFT BROWN

Natural brown, uncoated self-adhesive paper with ``eco friendly`` effect. It has a super strong permanent rubber adhesive with excellent adhesion to a wide range of substrates, including apolar and slightly rough substrates. Kraft labels guarantee good performance at lower temperatures.
Material colour brown matt
Material type textured unbleached
Weight / thickness 90 g/m2 / 130 mic
Adhesive type super strong
Min. application temperature +5°C
Temperature of use od -30° C do +70° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

Stickers (max. sheet 320 x 450 mm)

PP WHITE GLOSS FILM

Standard PP film has a permanent acrylic adhesive with high initial tack and good performance at low temperatures on a variety of substrates. Intended for application on plastic packaging, glass, metal, varnished surfaces as well as cardboard and paper. Works for most common applications.
Material colour white gloss
Material type PP film
Weight / thickness 54 g/m2 / 60 mic
Adhesive type standard
Min. application temperature +5°C
Temperature of use od -40° C do +120° C
Mechanical durability high
Moisture resistance yes
Food contact non-direct

PVC WHITE GLOSS VINYL

Standard PVC film with higher thickness and flexibility. It has a permanent acrylic adhesive with high initial tack and good performance at low temperatures on a variety of substrates. Intended for application on plastic packaging, glass, metal, varnished surfaces as well as cardboard and paper. Works for most common applications.
Material colour white gloss
Material type PVC vinyl
Weight / thickness 72 g/m2 / 80 mic
Adhesive type standard
Min. application temperature +5°C
Temperature of use od -30° C do +90° C
Mechanical durability high
Moisture resistance yes
Food contact non-direct

PVC CLEAR GLOSS VINYL

The transparent PVC film has a permanent acrylic adhesive with high initial tack and good performance at low temperatures on a variety of substrates. Intended for application on plastic packaging, glass, metal, varnished surfaces as well as cardboard and paper. Works for most common applications.
Material colour transparent gloss
Material type PVC vinyl
Weight / thickness 72 g/m2 / 80 mic
Adhesive type standard
Min. application temperature +5°C
Temperature of use od -30° C do +90° C
Mechanical durability high
Moisture resistance yes
Food contact non-direct

PES SILVER GLOSS FILM

Silver foil has a permanent acrylic emulsion adhesive. This clear, general-purpose adhesive is designed for smooth to slightly uneven surfaces. It is weather resistant with good adhesion even on apolar substrates.
Material colour silver chrome
Material type PES film
Weight / thickness 72 g/m2 / 50 mic
Adhesive type standard
Min. application temperature +5°C
Temperature of use od -430° C do +90° C
Mechanical durability high
Moisture resistance yes
Food contact non-direct

PAPER SEMIGLOSS

White, one-sided coated wood-free self-adhesive paper with a semi-gloss surface. It is FSC® certified. The adhesive has high initial tack and good performance at low temperatures on a wide range of substrates.
Material colour white semigloss
Material type coated paper
Weight / thickness 80 g/m2 / 70 mic
Adhesive type standard
Min. application temperature +5°C
Temperature of use od -20° C do +70° C
Mechanical durability low
Moisture resistance no
Food contact non-direct

PAPER WHITE LAID PREMIUM

Uncoated, matte woodfree paper. It has a delicate, ribbed structure. Moisture resistant. It has a standard adhesive with high initial tack and good low temperature performance on a wide range of substrates.
Material colour white matt
Material type paper textured premium
Weight / thickness 80 g/m2 / 100 mic
Adhesive type standard
Min. application temperature +5°C
Temperature of use od -20° C do +80° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

PAPER CREME CANE PREMIUM

Uncoated, natural bagasse paper. It has an acrylic super permanent adhesive with high tack. Paper dedicated to difficult surfaces such as wood, some cardboard and plastics such as HDPE, PP, PET and PVC.
Material colour creme matt
Material type paper premium
Weight / thickness 90 g/m2 / 130 mic
Adhesive type super strong
Min. application temperature +5°C
Temperature of use od -20° C do +80° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

PAPER IVORY PREMIUM

Woodfree, uncoated, matte paper with a delicate cream shade. It has a standard adhesive with high initial tack and good low temperature performance on a wide range of substrates.
Material colour creme matt
Material type paper premium
Weight / thickness 80 g/m2 / 120 mic
Adhesive type super strong
Min. application temperature +5°C
Temperature of use od -20° C do +80° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

PAPER KRAFT BROWN

Kraft is a natural, unbleached and uncoated self-adhesive paper with a super-strong adhesive. It is distinguished by high strength and excellent surface properties. Made of 100% virgin Kraft fibre.
Material colour brown matt
Material type paper textured unbleached
Weight / thickness 70 g/m2 / 102 mic
Adhesive type super strong
Min. application temperature +5°C
Temperature of use od -20° C do +80° C
Mechanical durability moderate
Moisture resistance yes
Food contact non-direct

Rigid plates

PVC HARD SHEET 0,3 - 0,7 mm

Hard pvc sheets are a paper substitute very often chosen by our customers. The material is distinguished by a regular structure with a smooth surface and low water absorption. Hard pvc film is flexible and resistant to external conditions.
Material colour white gloss / matt
Material type hard PVC
Thickeness 0,3 – 0,7 mm
Printing technology UV
Sheet size 100 x 140 cm
Mechanical durability high
Rainproof yes
Flame retardancy no data

PP HARD SHEET 0,3 - 0,7 mm

Polypropylene hard film, so-called Priplak, or solid polypropylene sheets. It is a modern material produced in an environmentally friendly way. It will work well as a POS element at points of sale or as a weather-resistant poster.
Material colour white matt
Material type hard PP
Thickeness 0,3 – 0,7 mm
Printing technology UV
Sheet size 100 x 140 cm
Mechanical durability medium
Rainproof yes
Flame retardancy no data

HIPS 1-3 mm

HIPS are boards made of high-impact polystyrene. It is a rigid, hard and homogeneous board that enjoys continued success as an element of printed POS advertising graphics. HIPS is completely moisture resistant.
Material colour white gloss / matt
Material type high impact polystyrene
Thickeness 1 – 3 mm
Printing technology UV
Sheet size 100 x 200 cm
Mechanical durability high
Rainproof yes
Flame retardancy no data

CORREX - FLUTED POLYPROPYLENE 3 mm, 5 mm

Hollow or fluted polypropylene is a popular advertising material, widely used, especially as an economical advertising sign. PP sheets are made of lightweight corrugated plastic, also known as Kartonplast, Correx or Akilux. It is an inexpensive, very lightweight and extremely versatile material.
Material colour white matt
Material type polypropylene
Thickeness 3 mm, 5 mm
Printing technology UV
Sheet size 200 x 300 cm
Mechanical durability medium
Rainproof yes
Flame retardancy no data

AKYLITE - BUBBLE POLYPROPYLENE 3 mm

Honeycomb or bubble polypropylene sheets are a double sided material also known as Akyprint. This light and modern board is a revolutionary solution in the field of printed outdoor graphics.
Material colour white matt
Material type sandwich polypropylene
Thickeness 3 mm
Printing technology UV
Sheet size 205 x 305 cm
Mechanical durability high
Rainproof yes
Flame retardancy no data

KATZ DISPLAY BOARD 2 mm

KATZ Display are wood-free cardboard boards that are distinguished by their natural appearance and double-sided coated surface. KATZ is a material that is consistent with the concept of sustainable development.
Material colour white matt
Material type coated cardboard
Thickeness 2 mm
Printing technology UV
Sheet size 125 x 250 cm
Mechanical durability medium
Rainproof no
Flame retardancy no

DISPA 3,8 mm

DISPA are boards made of 100% paper. Their unique extruded core gives the boards optimal rigidity and makes them an ideal material for short-term promotional and advertising campaigns. DISPA are eco-friendly boards.
Material colour white matt
Material type paper sandwich board
Thickeness 3,8 mm
Printing technology UV
Sheet size 125 x 245 cm
Mechanical durability low
Rainproof no
Flame retardancy no

KAPPA FOAM 3, 5, 10 mm

Lightweight foam boards with a polyurethane foam core and multilayer coated paper facings are intended for indoor use. The plate is distinguished by its rigidity and low weight.
Material colour white matt
Material type paper + polystyrene
Thickeness 3, 5, 10 mm
Printing technology UV
Sheet size 205 x 305 cm
Mechanical durability low
Rainproof no
Flame retardancy no

FOAMED PVC 1, 2, 3, 5, 10 mm

Foamed PVC is distinguished by relatively good strength and resistance to external conditions, at the same time moderate weight. PVC foam plates perfectly fulfill their role as a rigid and thick material for printing. It is a popular rigid plate valued in the production of advertising graphics.
Material colour white matt
Material type foamed pvc
Thickeness 1, 2, 3, 5, 10 mm
Printing technology UV
Sheet size 205 x 305 cm
Mechanical durability medium
Rainproof yes
Flame retardancy yes

ACM COMPOSITE ALUMINIUM 2, 3, 5 mm

Composite aluminum plates are distinguished by high durability, stiffness and dimensional stability. ACM Alu Dibond Multipanel is a high-quality board designed for long-term use. Aluminum composite panels are a proven standard in advertising production.
Material colour white matt
Material type composite aluminium
Thickeness 2, 3, 5 mm
Printing technology UV
Sheet size 205 x 305 cm
Mechanical durability high
Rainproof yes
Flame retardancy yes

ACRYLIC - PLEXIGLASS 3 mm, 5 mm

Acrylic glass, i.e. plexiglass or PMMA, is a substrate with many advantages and applications. Plexiglass is most often chosen as a substrate for the production of signs, decorative prints, information or advertising boards, illuminated light boxes, covers.
Material colour transparent gloss
Material type PMMA
Thickeness 3 mm, 5 mm
Printing technology UV
Sheet size 205 x 305 cm
Mechanical durability high
Rainproof yes
Flame retardancy no data